Tecnetics Alpha 2000 Manuale Utente

OWNER’S MANUALIf you do not have prior experiencewith a metal detector, we stronglyrecommend that you:1) Adjust the Sensitivityto a low setting in the

1011OPERATION and CONTROLSWhile in DISCRIMINATIONmode, press and holdthe Pinpoint button toactuate PINPOINT.While in ALL-METALSmode, press and holdthe

1011OPERATION and CONTROLSWhile in DISCRIMINATIONmode, press and holdthe Pinpoint button toactuate PINPOINT.While in ALL-METALSmode, press and holdthe

94. Size and Depth of Buried ObjectsThe relative depth of an object is displayed at the left of the display as a 1digit number, 0 to 9 inches. The siz

813THE BASICS OF METAL DETECTINGA hobby metal detector is intended for locating buried metal objects. Whensearching for metals, underground or on the

7QUICK-START DEMONSTRATIONI. Supplies Needed• a Nail • a Zinc Penny (dated after 1982)• a Nickel • a QuarterII. Position the Detectora. Place the dete

6The detector requires a single 9-volt ALKALINE battery (battery notincluded).Do not use ordinary zinc carbon batteries.Rechargeable batteries can als

5ASSEMBLYIN THE FIELD TECHNIQUES (continued)Adjusting the Arm RestThe arm rest may be movedforward or backwards by removingthe single screw and nut, a

174ASSEMBLYAssembly is easy andrequires no tools.●1 Loosen Locking Collar by rotating100% counterclockwise.●2 Insert the Lower Stem into the S-Rod and

TERMINOLOGYHEADPHONE JACKThe following terms are used throughout the manual, and are standardterminology among detectorists.ELIMINATIONReference to a

2TABLE OF CONTENTSTerminology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3Assembly . . . . . . . . . . .

2TABLE OF CONTENTSTerminology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3Assembly . . . . . . . . . . .

OWNER’S MANUALIf you do not have prior experiencewith a metal detector, we stronglyrecommend that you:1) Adjust the Sensitivityto a low setting in the

TERMINOLOGYHEADPHONE JACKThe following terms are used throughout the manual, and are standardterminology among detectorists.ELIMINATIONReference to a

174ASSEMBLYAssembly is easy andrequires no tools.●1 Loosen both Locking Collars byrotating 100% counterclockwise.●2 Insert the Upper Stem into the S-R

5ASSEMBLYIN THE FIELD TECHNIQUES (continued)Adjusting the Arm RestThe arm rest may be movedforward or backwards by removingthe single screw and nut, a

6The detector requires a single 9-volt ALKALINE battery (battery notincluded).Do not use ordinary zinc carbon batteries.Rechargeable batteries can als

7QUICK-START DEMONSTRATIONI. Supplies Needed• a Nail • a Zinc Penny (dated after 1982)• a Nickel • a QuarterII. Position the Detectora. Place the dete

813THE BASICS OF METAL DETECTINGA hobby metal detector is intended for locating buried metal objects. Whensearching for metals, underground or on the

94. Size and Depth of Buried ObjectsThe relative depth of an object is displayed at the left of the display as a 1digit number, 0 to 9 inches. The siz